Printable Electronics Equipment

CPI’s National Printable Electronics Centre includes 1250m2 of Class 1000 and 100 Clean Room space and is supported by fully equipped formulations, electrical test and R&D laboratories. CPI also operate a commercial scale integrated smart systems print facility which is situated in a non clean room environment.

In addition, CPI have flexible conference and meeting room facilities which can be configured to hold up to 80 delegates.

The equipment list below can be filtered by market, technique and maximum substrate size using the drop down menus above or alternatively you can use the virtual tour. If you have any questions regarding the use of CPI’s equipment please contact Steven Bagshaw on


Download Printable Electronics Capability Brochure

Tamarack Stepper Tool

Tamarac-Stepper-Tool
Cassette to cassette transfer 1X Magnification with ±100ppm correction range 6” reticles with a 12 reticle library i-line exp… Read more »
Markets: ,
Technique:
Max Substrate Size:

OLED/OPV Prototyping Line

LACE Line2
CPI’s OLED/OPV Prototyping Line has been designed to enable the development and production of organic light emitting diode and… Read more »

Aurion Etcher

Aurion Etcher
GEN 2 scale (370mm x 470mm). The Aurion Etcher is an Reactive Ion Etching (RIE) plasma etching system with 2 Process chambers. It h… Read more »
Markets: , ,
Technique:
Max Substrate Size:

SCT Sputterer

SCT Sputterer
GEN 2 scale) 370mm x 470mm Manual load onto pallets, up to 15 pallets per run 4 Target positions 24”x5” Target Pulsed DC power sup… Read more »
Markets: , ,
Technique:
Max Substrate Size:

Solar Semi Wet Etch Cleaner

Solar-Semi-Wet-Etch-Cleaner
The Solar Semi Wet Etch Cleaner handles 8 inch, 12 inch and GEN2 sized substrates. The system is fully automated and capable of etchi… Read more »
Markets: ,
Technique: ,
Max Substrate Size:

Solar Semi Coating Bake Development Tool

Solar Semi Coating Bake Development Tool
The Coat Bake Development tool handles 8 inch, 12 inch and GEN2 size substrates. It is fully automated and capable of spinning photo… Read more »
Markets: ,
Technique: ,
Max Substrate Size:

The Orbotech Measurement Tool

The-Orbotech-Measurement-Tool
The Orbotech measurement tool is used for defectivity measurement and can handle 4 inch to GEN2 size plates. It can distinguish lay… Read more »
Markets: ,
Technique:
Max Substrate Size:

Muetec MT 5500 Automated Optical Inspection (AOI)

Muetec-MT-5500-Automated-Microscope
The Muetec MT5500 AOI system is designed for single substrates up to 22 inch, demonstrating the capability to develop, manufactur… Read more »
Markets: ,
Technique:
Max Substrate Size:

Beneq TFS-500 Atomic Layer Deposition Batch tool

Beneq-TFS-500-Atomic-Layer-Deposition-Batch-tool
The Atomic Layer Deposition tool deposits nano-scale thicknesses of materials under highly controlled conditions in a vacuum to… Read more »
Markets: , ,
Technique:
Max Substrate Size:

Beneq Roll to Roll Atomic Layer Deposition Tool

Beneq
CPI offers a roll to roll atomic layer deposition (ALD) tool which is capable of handling films up to 600mm wide with thicknesses ran… Read more »

Pilot Sputter Roll-to-Roll Coater

Pilot-Sputter-Roll-to-Roll-Coater
CPI operate a pilot scale roll-to-roll vacuum sputter coater capable of handing films with widths up to 400mm, thickness range 12 … Read more »
Markets:
Technique: ,
Max Substrate Size:

Inkjet Flex

Inkjet Flex
CPI has recently acquired the digital prototyping assets of Conductive Inkjet Technology (CIT) and its associated licences and k… Read more »
Markets:
Technique:
Max Substrate Size:

Jenton JenActUV Conveyor

Jenton JenActUV Conveyor
The Jenton UV Conveyor is used for the surface activation of substrates using UV light. The tool has variable speed and lamp height a… Read more »

Carbolite HTCR5/28 High Temperature Clean Room...

Carbolite HTCR5/28 High Temperature Clean Room Oven
The Carbolite HTCR5/28 High Temperature Clean Room Oven is used for the drying off of substrates under nitogren. Specifications:… Read more »

EVG 6200 Mask Aligner

EVG 6200 Mask Aligner
· Manual handling and exposure of 4inch & 6 inch round and 8 inch square substrates with manual alignment. · Manual mask load.… Read more »
Markets: ,
Technique:
Max Substrate Size:

Roll to Roll Slot-Die/Screen Printing Line

Roll to Roll Slot-Die/Screen Printing Line
CPI provides clients with open access capability to our Roll to Roll Slot-Die/Screen Printing Line for the roll to roll printing, c… Read more »

Nilpeter MO4/FA4 Combination R2R Press: printing...

Nilpeter MO4_FA4 Combination R2R Press- printing of conductive tracks
Nilpeter MO4/FA4 Combination R2R Press: printing of inks Printing Techniques Flexo Gravure Screen Offset litho Hot air, UV, NIR c… Read more »
Markets:
Technique: ,
Max Substrate Size:

Roll to Roll Encapsulation Line

Roll to Roll Encapsulation Line
CPI houses an open access encapsulation module which is complimented by the Roll to Roll Slot Die/Screen Printing Line. The roll to… Read more »

Maker-Bot 3D Printer

Maker-Bot 3D Printerg
The Makerbot Replicator 2X is an experimental printer with dual extrusion capabilities and a build volume of 160 x 250 x 150 mm. It is… Read more »
Markets:
Technique:
Max Substrate Size:

NovaCentrixPulseForge1300

NovaCentrix
A specialist system designed for the high speed photonic curing of printed electronics inks. The NovaCentrixPulseForge1300 sta… Read more »
Markets:
Technique:
Max Substrate Size:

Hitachi SU8230 Cold Field Emission Scanning...

Hitachi SU8230 Cold Field Emission Scanning Electron Microscope
The SU8230 is Hitachi’s ultra-high resolution cold-field emission scanning electron microscope. It affords a high current de… Read more »

Zeiss Axio Imager.Z2 vario Microscope

Zeiss-Axio-Imager.Z2-vario-Microscope
The Zeiss Axio Imager.Z2 vario Microscope is equipped with objectives of 5, 10, 20, 50 and 100x magnification and a 370 x 470mm motor… Read more »

Filmetrics Spectrometer

filmetrics-spectrometer
The Filmetrics Spectrometer is capable of thin film measurement on 0.1inch to GEN2 substrate sizes. Typical limitations are betw… Read more »

Cary 5000 Spectrophotometer

Cary-5000-Spectrophotometer
UV/Vis/NIR spectrophotometer. Capable of measuring from 180-3300nm transmission. Also featuring Diffuse reflection accesso… Read more »

Evolution 600 Spectrophotometer

Evolution-600-Spectrophotometer
UV/Vis/NIR spectrophotometer. Capable of measuring from 190-900nm transmission. Also featuring Diffuse reflection accessor… Read more »

Moorfield Evaporation System

Moorfield-Evaporation-System
The Moorfield Evaporation System is a floor standing vacuum evaporator for metal thin film deposition designed for pilot line and… Read more »
Markets:
Technique: ,
Max Substrate Size:

The Plasmalab 800 Plus

The-Plasmalab-800-Plus
The Plasmalab 800 Plus is a plasma processing system, which can be configured to carry out Reactive Ion Etching (RIE), Plasma Enhan… Read more »
Markets:
Technique:
Max Substrate Size:

The Dimatix Printer

Dimatix-Printer
The Dimatix Printer is a desktop inkjet printer which is used for organic semiconductor printing, metal ink printing and ink testi… Read more »

Automatic Glass Scriber

Automatic-Glass-Scriber
The Automatic Glass Scriber is capable of cutting glass panels up to 305.2 mm square and 0.7 mm to 1.1 mm in a single cut. The machine ha… Read more »
Markets: ,
Technique:
Max Substrate Size:

Laser pro Sprit GE

Laser-pro-Sprit-GE
The Laser pro Sprit GE is an engraving and cutting machine . Large capacity work area of 965 x 610 mm Optional LaserPro Mac plugin soft… Read more »
Markets: ,
Technique:
Max Substrate Size:

Sun-Tec Laminator Tool

Sun-Tec-Laminator-Tool
The Sun-Tec laminator tool is used to attach adhesive or polyester films to glass or silicon. The film and substrate are manually lo… Read more »
Markets: ,
Technique:
Max Substrate Size:

NanoMan V Atomic Force Microscope

NanoMan-VS Atomic-Force-Microscope
NanoMan V Atomic Force Microscope Dimension Hybrid XYZ Scanner   • X-Y scan range: – 90μm square • Z (vertical) range: –… Read more »

Wentworth Semi-AutoProber – semiconductor...

Wentworth-Semi-AutoProber–semiconductor-parameter-test
The Wentworth is a semi-automated probe station configured with an Agilent4155C semiconductor parameter analyser. The tool ena… Read more »

Fast Tech Solvent Bench

Fast-tech-solvent-bench
The solvent bench is a unit consisting of 4 tanks, all filled by manual fill, designed for Positive Resist Stripper, Acetone, IPA, X… Read more »
Markets: ,
Technique:
Max Substrate Size:

Acid Bench/Wet Etch Tool

Acid-Bench-Wet-Etch-Tool
The acid bench is a unit consisting of 4 acid baths and 2 Di Water Dump Rinse tanks. The tanks can accommodate 4 inch up to 12 inch substr… Read more »
Markets:
Technique:
Max Substrate Size:

Hitachi Scanning Electron Microscope (SEM)

Hitachi-Scanning-Electron-Microscope-(SEM)
The SEM utilises an electron beam to create an image by scanning the surface of a substrate under vacuum. The detected electrons pro… Read more »

Nano-master Glass Cleaner

Nano-master-Glass-Cleaner
The Nano-master Glass Cleaner is a single substrate cleaner which can handle substrates up to 12 inches square in size. The cleaner… Read more »
Markets: ,
Technique:
Max Substrate Size:

Heidelberg Direct Write Lithography Mask Writer

Heidelberg-Direct-Write-Lithography-Mask-Writer
The Heidelberg Direct Write Lithography 66 laser lithography system is a high resolution pattern generator for mask making and di… Read more »
Markets: ,
Technique:
Max Substrate Size:

Brewer Spin Coater

coater
The Brewer spin coater features a space-saving design, onboard PC controller, full-colour touch screen interface, and virtuall… Read more »
Markets: ,
Technique: , ,
Max Substrate Size:

Brewer Spin Developer

Brewer-Spin-Developer
The Brewer spin developer features a space-saving design, onboard PC controller, full-colour touch screen interface, and virtu… Read more »
Markets: ,
Technique: , ,
Max Substrate Size:

Brewer Spin Etcher

Brewer-Spin-Etcher
The Brewer spin etcher features a space-saving design, onboard PC controller, full-colour touch screen interface, and virtuall… Read more »
Markets: ,
Technique: , ,
Max Substrate Size:

Alkali Bench/Wet Etch Tool

Alkali-Bench-Wet-Etch-Tool
The alkali bench is a unit consisting of 1 developer tank filled by bulk chemical fill, 1 DI Water Dump Rinse tank, and 1 tank for manua… Read more »
Markets: ,
Technique:
Max Substrate Size:

Tamarack Mask Aligners

Tamarak Mask Alligners
Tamarack Mask Aligners Broadband contact and proximity exposure with manual load and alignment of 4, 8 and 12 inch square substrat… Read more »
Markets: ,
Technique:
Max Substrate Size:

Brewer Spin Coater

Brewer-Spin-Coater
The Brewer spin coater features a space-saving design, onboard PC controller, full-colour touch screen interface, and virtuall… Read more »
Markets: ,
Technique:
Max Substrate Size:

Optomec Aerosol Jet Printer

Optomec-Aerosol-Jet-Printer
The Optomec Aerosol Jet Printer is capable of printing a large range of materials with viscosities in the range 1 -1000cP. For R&… Read more »
Markets: , ,
Technique:
Max Substrate Size: ,

Litrex Industrial Scale Inkjet Printer

Litrex- Industrial-Scale-Inkjet-Printer
The Litrex Industrial Scale Inkjet printer has a print speed of up to 300mm/sec. It is used for organic semiconductor and metal ink p… Read more »
Markets: , ,
Technique:
Max Substrate Size:

Foil Stamper

Foil Stamper
This tool allows the direct patterning of metals onto a substrate by applying a normal force to heated foil using a patterned stampi… Read more »
Markets: , ,
Technique:
Max Substrate Size:

Roll to Roll Slot Die Coater

Roll to Roll Slot Die Coater
The roll to roll slot die coater is used to apply wet coatings to a moving flexible substrate. The coatings are applied using a slot di… Read more »

OLED Production Test Glovebox (x 2)

OLED Production Glovebox (x2)
The OLED Test Glovebox is an OLED prototyping line designed to enable the research and development and manufacture of Organic Ligh… Read more »
Markets:
Technique: ,
Max Substrate Size:

MBraun Calcium test glovebox

MBraun Calcium test glovebox
The MBraun Calcium Test Glovebox  is a dry Nitrogen glovebox for the construction of calcium test cells and the measurement of W… Read more »

Plasma Quest Deposition Tool

Plasma Quest Deposition Tool
The Plasma Quest Desposition Tool is a multi-chamber sputter system which uses a remote plasma generation technique in combinati… Read more »
Markets:
Technique:
Max Substrate Size:

MRC 603 Sputter Tool

MRC 603 Sputter Tool
The MRC 603 Sputter Tool has dry coating magnetron sputters capable of depositing from three target stations onto substrates size… Read more »
Markets: , ,
Technique:
Max Substrate Size:

Taly-surf CCI Optical Interferometer

Taly-surf CCI Optical Interferometer
The TalySurf CCI is an advanced 3-dimensional non-contact optical metrology tool used for advanced surface characterisation. T… Read more »

Zeiss SteREO Discovery.V20 Microscope

Zeiss-SteREO-Discovery
Motorized 20:1 zoom Seamless integration into the modular system of SteREO microscopes Up to 345x total magnification with 10x ey… Read more »

Veeco Dektak Stylus Profiler

Veeco Dektak Stylus Profiler
The Veeco Dektak Stylus Profiler characterises film thickness using a low force tip technology. Measuring ranges from 50 Angstro… Read more »

Contact Angle Measurement

Contact Angle Measurement
The contact angle measurement utilises the static sessile drop method to determine the contact angle a known liquid makes with an i… Read more »

Filmetrics Automatic Thin Film Mapping Tool

Filmetrics Automatic Thin Film Mapping Tool
The Filmetrics Automatic Thin Film Mapping Tool is capable of thin film measurement on 0.1 to 12 inch substrate sizes. Typical limi… Read more »

Jobin Yvon MM16 Ellipsometer

Jobin Yvon MM16 Ellipsometer
Thin Film Characterisation CCD detection system Measurement range of 430-850nm… Read more »
Markets:
Technique:
Max Substrate Size:

Mocon Aquatran WVTR Measurement Equipment

Mocon Aquatran WVTR Measurement Equipment
WVTR measurement equipment with capability to measure down to permeations rates of 5×10-4g/m2.day. CPI has three modules f… Read more »
Markets:
Technique:
Max Substrate Size:

Brewer Spin Coater

Brewer-Spin-Coater2
The Brewer Spin Coater is precision spin coater system designed for forming a thin film by dispensing chemistry onto a substrate. T… Read more »
Markets: ,
Technique:
Max Substrate Size:

IGT F1 Proofer

IGT F1 Proofer
IGT F1 Proofer for the evaluation of inks at small scale. Specially designed to check ink conductivity and colour matching, the IGT… Read more »
Markets:
Technique: , ,
Max Substrate Size:

Jandel 4 Point Probe (x 2)

jandel
The Jandel 4 Point Probe is a multi-height probe, measuring resistivity on samples using a four point probe head. The tool comes equ… Read more »

Wentworth Semi-Auto Probecard Station/ Keithley...

Wentworth Semi-Auto Probecard Staion
Configured with a probcard this system can measure 30 channels simultaneously, allowing for the rapid characterisation of devic… Read more »
Markets: ,
Technique: ,
Max Substrate Size:

EVG610 Mask Aligner

EVG610-Mask-Aligner
Manual handling and exposure of 4 inch square and 6 inch round substrates with manual alignment. Manual mask load. Proximity, soft… Read more »
Markets: ,
Technique:
Max Substrate Size:

Ultraprint 90 Solder Paste Printer

Ultraprint 90 Solder Paste Printer
The Ultraprint 90 printer is a precision engineered semi-automatic solder paste printer. The Ultraprint 90 is capable of printin… Read more »
Markets: ,
Technique: ,
Max Substrate Size:

Laurell Spin Etch Tool (x4)

Laurell Spin Etch Tool (x4)
CPI is equipped with 4 Laurell Spin Etch Tools. The Laurell Spin Etch is a system typically employed for both solvent and aqueous-ba… Read more »
Markets: ,
Technique:
Max Substrate Size:

Fume cupboards (x16)

8 Fume Cupboards
CPI are equipped with 16 fume cupboards in total. 7 x solvent 9 x acid/alkali… Read more »

Suss Microtec Spin Coating System

Suss Microtec Spin Coating System
The Suss Microtec Spin Coating system is used for the coating of substrates up to 8 inch in size. It has an integrated hotplate for cur… Read more »
Markets: ,
Technique:
Max Substrate Size:

Brewer Spin Coater

Brewer Spin Coater
The Brewer Spin Coater is precision spin coater system designed for forming a thin film by dispensing chemistry onto a substrate. T… Read more »
Markets: ,
Technique:
Max Substrate Size:

Plasma Etch Tool PE100

Plasma Etch Tool PE100
Plasma etch system available for use with both argon and oxygen gas.  The tool can be used for the surface treatment of substrates,… Read more »
Markets: ,
Technique:
Max Substrate Size:

Oxford Instruments PlasmaLab 80 Plus

Oxford Instruments Plasmalab 80 Plus
PlasmaLab 80plus® PECVD system, made by Oxford Instruments, is a multipurpose tool capable of depositing silicon oxide, silico… Read more »
Markets: ,
Technique:
Max Substrate Size: ,

Moorfield Evaporation System

Moorfield Evaporation System
The Moorfield Evaporation System is a floor standing vacuum evaporator for metal thin film deposition designed for pilot line and… Read more »
Markets: ,
Technique:
Max Substrate Size:

Moorfield Sputter System

Moorfield Sputter System
The Moorfield Sputter System is designed as a flexible research and development tool capable to perform vaccum deposition proces… Read more »
Markets: ,
Technique:
Max Substrate Size:

SCS Parylene Coater

SCS Parylene Coater
The SCS Parylene Coater is a Parylene deposition system designed for laboratory research and development and testing.  The coat… Read more »
Markets: ,
Technique:
Max Substrate Size:

Research Microscopes

Research Microscopes
CPI has a wide selection of microscopes available for research and development with the capability to analyse 1, 2, 4, 6, 8 and 12 inc… Read more »

KP Technology Kelvin Probe System

KP Technology Kelvin Probe System
The Kelvin Probe is a non-contact, non-destructive measurement device used to investigate properties of materials. It is based o… Read more »
Markets: ,
Technique: ,
Max Substrate Size:

Nikon Eclipse L300N Microscope (x 2)

nikon
Nikon Eclipse L300N Wafer Inspection microscopes incorporate Nikon’s renowned CFI60 infinity optics, offering the world… Read more »

Wirebar Coater

wirebar-coater
Wirebar coating is used as a quick means to test coating materials before scale up to roll-to-roll processes. The coater can be used… Read more »
Markets: , ,
Technique:
Max Substrate Size:

DEK 248 Flatbed Screen Printer

dek-flatbed
Semi-automatic screen printer for Inks & conductive adhesives Maximum substrate size: 400 x 305mm… Read more »
Markets:
Technique: ,
Max Substrate Size:

Europlacer iineo Pick & Place Component...

Euoplacer Lineo Pick & Place Component Attachment Tool
Technique: Conductive adhesive dispense, Pick and Place   Maximum substrate size: 700 x 460mm Min/Max component size: 0.4m… Read more »
Markets:
Technique: ,
Max Substrate Size:

Trotec Speedy 300 CO2 Laser

Trotec Speedy 300 CO2 Laser
Technique: Laser cutting, engraving Maximum substrate size: 726 x 432mm Substrates: Acrylic, Glass, Plastics, Paper, Foils… Read more »
Markets:
Technique: ,
Max Substrate Size:

Esko Kongsberg i-XE10 Digital Cutting Table

Esko Kongsberg i-XE10 Digital Cutting Table
Technique: Cutting and Creasing tool for cartons, corrugated boxes, plastics Max substrate size: 1100mm x 800mm… Read more »
Markets:
Technique: ,
Max Substrate Size:

MMM Group Venticell Adhesive Curing Oven

oven
Max substrate size: 900mm x 450mm… Read more »
Markets:
Technique: ,
Max Substrate Size:

Solar Simulator

Solar-Simulator
The Solar Simulator allows photovoltaic cells up to 8 inch in size to be tested for solar response and efficiency.… Read more »
Markets:
Technique: ,
Max Substrate Size:

Leica Manual Micro Probe Station

Leica-Manual-Micro-Probe-Station
The Leica Manual Micro Probe Station is used for rapid tests or small quantity measurement. The station allows the manual probing o… Read more »
Markets:
Technique: ,
Max Substrate Size:

Keithley 4200-SCS Semiconductor Characterization...

2-x-Keithley-4200-SCS-Semiconductor-Characterization-System
The 4200-SCS is a modular, fully integrated parameter analyzer that performs electrical characterization of materials, semico… Read more »
Markets:
Technique: ,
Max Substrate Size:

OLED Test Box

OLED-Test-Box
The OLED Test box allows for OLED materials and devices to be measured for intensity and spectral response. Materials can be accura… Read more »

Mecmesin MultiTest (Tensile and Compression)...

MultiTest
The Mecmesin MultiTest equipment provides a powerful and comprehensive tensile & compression test system for force measure… Read more »

Botest

Botest
The Botest allows for I/V measurements and lifetime tests to be made on 2 inch OLED test samples. Luminance intensity can be recorde… Read more »
Markets:
Technique:
Max Substrate Size:

Keithley Series 2600A and 2600B System

Keithley-Series-2600A-and-2600B-System-SourceMeter
The Keithley Series 2600A and 2600B System SourceMeter is the most powerful, fastest, and highest resolution SMU instrument in th… Read more »

Thermogravimetric analyser (TGA)

tga
Thermogravimetric analyser (TGA) is most often used to analyse physical and chemical phase transitions. This is primarily carri… Read more »

Differential Scanning Calorimeter (DSC)

dsc
The Differential Scanning Calorimeter (DSC)is a thermo analytical technique in which the difference in the amount of heat requir… Read more »

TA Instruments AR1500ex Rheometer

ta
The TA Instruments AR1500ex Rheometer is an advanced controlled stress, strain, and rate rheometer which comes standard with wid… Read more »

KSV NIMA Dip Coater MultiVessel/Large

KSV NIMA Dip Coater MultiVessel
The KSV NIMA Dip Coater Multi Vessel Medium is designed for coating medium to large samples (max. H300 x W950 x T15, 500g) using multi… Read more »

Netzsch MicroCer Bead Mill

Netzsch MicroCer Bead Mill
The Netzsch MicroCer Bead Mill is used for grinding solid materials and/or dispersing them into liquids using zirconium oxide bea… Read more »

Hitachi Ion Beam Milling System

ion-beam
The Hitachi Ion Beam Milling System is a preparation tool to be used in conjunction with the scanning electron microscope. The requ… Read more »

Centaur 2 MSE Centrifuge

Centaur 2 MSE Centrifuge
The Centaur 2 is a rugged, simple yet versatile non-refrigerated benchtop centrifuge. It can take a wide range of accessories and i… Read more »

Nicolet IS10 Thermo Scientific FTIR Spectrometer

nicolet
Fourier transform infrared (FTIR) spectroscopy is a rapid method of measuring the vibrations of functional groups and highly pol… Read more »

Solar Semi QS S 300 Spin Coater

Untitled-1
The Solar Semi Spin Coater is used for photo resist coating. This tool has manual substrate load and can handle 6inch round and 8inch… Read more »

Solar Semi QS SH 300Spin Developer

Solar Semi QS SH 300Spin Developer
The Solar Semi Spin Developer is used for the spray development of photo resist. The tool is complimented by Solar semi spin coater.… Read more »

Surface Plasma Treatment Tool

Surface Plasma Treatment Tool
The Surface Plasma Treater is an ECR microwave plasma system that produces a low ion damage plasma for altering surface energies.… Read more »

Roll to Roll Digital Lithography Line

Roll to Roll Digital Lithography Line
A high speed roll to roll digital lithography tool for the manufacture of flexible organic thin film transistors (OTFT) used in nex… Read more »

The OpTek Die Singulation Tool

OpTek Die Singulation Tool
The OpTek Die Singulation Tool uses a proprietary laser based approach for the conversion of wafer scale printed electronic films… Read more »
Markets:
Technique:
Max Substrate Size:

Newsletter

Sign up for our newsletter for specialist updates.

Subscribe to Newsletter

Twitter

Photonics companies get help to enter key #lifesciences market with new EU project @photonics21 @EU_H2020 @eprise_eu https://t.co/niqo7RCNCB
- Wednesday Feb 15 - 10:26am

Follow CPI on Twitter